Interior Glass (Excluding Shower Glass)

- Mild Soap Solution: Clean as needed with a microfiber cloth dampened with white vinegar and a drop of mild, non-abrasive liquid soap. Rinse and dry thoroughly.
- For Mineral Buildup: Use undiluted white vinegar on a microfiber cloth to gently rub the glass. Repeat if needed. For heavier buildup, use a Magic Eraser dampened with CLR (Calcium Lime Rust remover).

Exterior Glass

- Clean as needed with a mild detergent and water using a t-bar mop assembly and squeegee.
- For light buildup wipe down the glass with a microfiber cloth dampened with white vinegar and a drop of non-abrasive liquid soap (hand, body, or dish). Rinse and dry.

WARRANTY INFORMATION

Limited Warranty. PCT Global warrants that:

EnduroShield treated shower glass will remain more water repellent than untreated glass for the lifetime of the glass as long as manufacturer recommendations are followed and no abrasive cleaners are used.

EnduroShield treated shower glass will remain water repellent (water bead angle remaining greater than 70 degrees) on clean glass for a period of 10 years from the date of receipt provided by your dealer. The EnduroShield coating will not crack, peel, or discolor for the lifetime of the glass.

Conditions: EnduroShield must be professionally or factory applied to new shower glass by a certified applicator prior to coming into contact with any contaminants. EnduroShield must be maintained as per the manufacturer’s instructions to validate and maintain the warranty. This warranty applies to shower glass only and not to the use of the EnduroShield product on other glass applications.

The warranty is limited to the cost of replacement of the EnduroShield protective coating for retreatment. It does not cover the cost of labor for retreatment, the glass, hardware or any other components of the installation. This warranty is to the original purchaser and is not transferable.

If it is determined that an area which has been correctly maintained has not remained water repellent, the manufacturer will gladly arrange replacement product to re-coat the affected area. The manufacturer reserves the right to inspect the glass in order to determine that the product has been properly applied and maintained in accordance to the agreed Care Instructions.

If you believe the treatment is not visibly water-repellent on clean glass within the warranty period, send a contact request including your name, warranty codes, and a brief explanation to [email protected].

DISCLAIMER. EXCEPT FOR THE WARRANTY SET FORTH ABOVE, PCT GLOBAL MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE GOODS, INCLUDING ANY (A) WARRANTY OF MERCHANTABILITY; (B) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; OR (C) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE, OR OTHERWISE. EXCEPT WHERE LIMITED BY LAW, PCT GLOBAL SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE ENDUROSHIELD PRODUCT.

WARRANTY INFORMATION

Limited Warranty. PCT Global warrants that:

EnduroShield treated glass will remain water repellent (water bead angle remaining greater than 70 degrees) on clean glass for a period of 10 years from the date of receipt provided by your dealer as long as manufacturer recommendations are followed and no abrasive cleaners are used. The EnduroShield coating will not crack, peel, or discolor for the lifetime of the glass.

Conditions: EnduroShield must be professionally or factory applied to new glass by a certified applicator prior to coming into contact with any contaminants. EnduroShield must be maintained as per the manufacturer’s instructions to validate and maintain the warranty.

The warranty is limited to the cost of replacement of the EnduroShield protective coating for retreatment. It does not cover the cost of labor for retreatment, the glass, hardware or any other components of the installation. This warranty is to the original purchaser and is not transferable.

If it is determined that an area which has been correctly maintained has not remained water repellent, the manufacturer will gladly arrange replacement product to re-coat the affected area. The manufacturer reserves the right to inspect the glass in order to determine that the product has been properly applied and maintained in accordance to the agreed Care Instructions.

If you believe the treatment is not visibly water-repellent on clean glass within the warranty period, send a contact request including your name, warranty codes, and a brief explanation to [email protected].

DISCLAIMER. EXCEPT FOR THE WARRANTY SET FORTH ABOVE, PCT GLOBAL MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE GOODS, INCLUDING ANY (A) WARRANTY OF MERCHANTABILITY; (B) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; OR (C) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE, OR OTHERWISE. EXCEPT WHERE LIMITED BY LAW, PCT GLOBAL SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE ENDUROSHIELD PRODUCT.